| Additional Information | : | Polypropylene Impeller Material |
| Amperage Rating | : | 1.75 A |
| Bearing Type | : | Ball |
| Connection Size | : | 3/4 in, 1 in, 1-1/4 in, 1-1/2 in |
| Connection Type | : | NPT Flanged |
| Dimensions | : | 14-7/8 in L x 6-3/8 in H |
| Flow Rate | : | 0 to 33 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/12 hp |
| Material | : | Iron |
| Maximum Pressure | : | 125 psi |
| Model | : | 100NFI |
| Motor Speed Rating | : | 1725 rpm |
| Mounting Type | : | In-Line |
| Phase | : | 1 ph |
| Series | : | 100 Series |
| Temperature Rating | : | 225 deg F |
| Voltage Rating | : | 115 VAC |
Bell & Gossett Circulator Pump, 100 Series, Model: 100NFI, 0 to 33 gpm Flow Rate, 115 VAC, 1.75 A, 60 Hz, 125 psi Maximum Pressure, 1725 rpm Motor Speed Rating, 1/12 hp, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in Connection, NPT Flanged Connection, 1 ph Phase, In-Line Mounting, 225 deg F, Ball Bearing, Iron, 14-7/8 in L x 6-3/8 in H, Additional Information: Polypropylene Impeller Material
- The shaft and seal are housed in an assembly that can be easily repaired or replaced
- This pump's motor design, coupled with its overall hydraulic performance, allows the Bell & Gossett Series 100 to overcome system-related noise caused by valves, fittings or piping
- Resilient mounting provides quiet, dependable service with minimum annual lubrication
- Features a precision ground pump shaft is oversized to provide large bearing surfaces and a hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life
- Carbon steel shaft