| Amperage Rating | : | 41.7 A |
| Dimensions | : | 13.25 in L x 9.13 in W x 6.5 in H |
| Frequency Rating | : | 60 Hz |
| Phase | : | 1 ph |
| Power Rating | : | 10 kW |
| Temperature Rating | : | 2000 deg F |
| Voltage Rating | : | 208/240 V |
Warren Technology manufactures unitary electric heaters in a variety of shapes, sizes and configurations to be field-mounted in all brands of air conditioning equipment. Our design is safety tested and publicly LISTED by one or more of the following Independent Testing Agencies: Underwriters Laboratory (UL), Intertek Testing Services (ETL), Canadian Standards Agency (CSA), Applied Research Laboratories (ARL). Standard Heaters Models of 5, 8, 10, 15, and 20 KW are available for AC equipment brands such as: Carrier, Trane, York, Goodman, Rheem, Lennox, and many more.
Warren Technologies Unitary Electric Heater, 208/240 V, 41.7 A, 10 kW, 1 ph Phase, 60 Hz, 2000 deg F, 13.25 in L x 9.13 in W x 6.5 in H
- Fail-safe thermal fuse links have no moving parts, springs, or contacts; provides overheating and fire protection; and are field-replaceable
- Point Suspension Element Support System eliminates hot spots to extend heating element life
- 5 KW (maximum) Element Control Stages are controlled by chatter and rapid-cycle resistant contactors. Elements modules are field-replaceable
- Time Delay Between Steps: Restarts control stepping sequence on power interruption or brown-out to prevent full-load surges
- No Heater Off-Delay (as with bi-metal sequencers): Increases SEER rating and prevents heating overshoot
- Protective Frame Around Elements prevents damage to elements during shipping, handling, or installation
- Heater corners of the control panel are rounded to prevent exposed sharp edges that could injure an installer or damage the insulation in the air handler cavity during installation. Modular control wire plugs are provided for installation ease