| Actual Size | : | 23-3/8 in H x 11-3/8 in W x 1 in D |
| Air Flow Capacity | : | 600 cfm |
| Depth | : | 1 in |
| Filter Type | : | Pleated |
| Final Resistance | : | 1 in-WG |
| Frame Material | : | Die Cut Beverage Board |
| Height | : | 24 in |
| Initial Resistance | : | 0.27 in-WG |
| MERV | : | 8 |
| Media Area | : | 3.4 sq-ft |
| Media Material | : | Synthetic |
| Pleats per Linear Feet | : | 12 |
| Rated Velocity | : | 300 fpm |
| Temperature Rating | : | 150 deg F |
| Width | : | 12 in |
Purolator® is very pleased to announce the latest improvement in self-supported pleated filters the key Pleat® MERV 8 3 8, standard-capacity. The new key Pleat® is the result of the on going commitment and investment Purolator® is making to improve the science of air filtration and the quality and performance of its air filter products.
Purolator® Air Filter, Pleated Filter, Synthetic Media, Die Cut Beverage Board Frame, 12 in Width, 24 in Height, 1 in Depth, 8 MERV, 3.4 sq-ft Media Area, 12 Pleats per Linear Feet, 300 fpm Rated Velocity, 0.27 in-WG Initial Resistance, 1 in-WG Final Resistance, 600 cfm Air Flow Capacity, 23-3/8 in H x 11-3/8 in W x 1 in D Actual, 150 deg F
- A seven strap die-cut is located on the air leaving side of the key Pleat® MERV 8 3 8 providing additional strength and durability to each filter
- In combination, the boxed pleat tips provide more surface area and points of contact for the die-cut to be securely glued to the media pack
- The inside of the die-cut frame is completely coated with adhesive to ensure a solid bond at all points of contact with the media pack
- The pack is sealed inside the frame and pleat tips are bonded to the stabilizers and diagonal support members
- The sealant used to bond the frame to the media pack is highly water repellent
- That means that the filters maintain structural integrity even when wet, no delaminating, excessive buckling or collapsing
- The uniformity of pleat height and spacing ensures optimal performance throughout the useful life of every key Pleat® MERV 8 3 8 filter
- The combination of the self-supporting media and the innovative, automated construction also means low resistance to airflow and cost effective, environmentally responsible use of energy resources
- Pleats will not bunch or collapse which can cause an increase in pressure drop and potential failure of the filter
- Automated process delivers consistency and durability
- Durable, self-supporting synthetic media
- No metal, fully incinerable
- Die-cut frame with interlocking corners for added strength