| Amperage Rating | : | 4.1 A |
| BTU Rating | : | 36000 Btu/hr |
| CFM Rating | : | 1200 cfm |
| Configuration | : | Multi-Position |
| Connection Type | : | 3/4 in Sweat Suction, 3/8 in Sweat Liquid |
| Dimensions | : | 17-5/8 in W x 22-1/16 in D x 49-5/8 in H |
| Filter Size | : | 16-3/8 x 21-1/2 in |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/2 hp |
| Material | : | Aluminum Tube, Fin |
| Nominal Capacity | : | 3 ton |
| Phase | : | 1 ph |
| Refrigerant Type | : | R-410A |
| Series | : | REM4P |
| Voltage Rating | : | 208/230 VAC |
ICP™ Fan Coil, REM4P, 208/230 VAC, 4.1 A, 1/2 hp, 60 Hz, 1 ph Phase, 36000 Btu/hr, 1200 cfm, 3/4 in Sweat Suction, 3/8 in Sweat Liquid Connection, Tonnage: 3 ton, Aluminum, 17-5/8 in Overall Length, 22-1/6 in Overall Width, 49-5/8 in Overall Height, Additional Information: Multi-Position Configuration, R-410A Refrigerant, 16-3/8 x 21-1/2 in Filter Size
- Factory installed piston metering device with teflon ring (TXV on 60 size)
- Primary and secondary drain fittings
- Multiple electrical entry locations
- Time delay relay (TDR) programmed in motor
- HUD approved for manufactured housing
- Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1 in water column
- 1 in Thick insulation with R value of 4.2
- Filter (washable) available as accessory
- Five-speed ECM motor
- Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down flow with accessory kits)
- Low voltage circuit protective fuse (3 A) inline on wire harness
- No heat (plug) kit factory installed
- Five-years limited parts warranty
- Aluminum tube and fin evaporator co