| Additional Information | : | 3-Speed, 2-Bolt Flange Pipe Connection, 2 to 110 deg C Liquid Temperature, 983.2 kg/cu-m Density, 10 uF Capacitance, IEC 85 F Insulation Class |
| Amperage Rating | : | 0.53/0.69/0.75 A |
| Connection Size | : | 3/4 in, 1 in |
| Connection Type | : | Flanged |
| Dimensions | : | 6-8/16 in H x 5-8/16 in W |
| Flow Rate | : | 5.7 cu-m/hr |
| Frequency Rating | : | 60 Hz |
| Material | : | Stainless Steel |
| Maximum Head | : | 5.5 m |
| Maximum Pressure | : | 10 bar |
| Model | : | UPS 15-55 SFC |
| Number of Poles | : | 2 |
| Phase | : | 1 ph |
| Power Rating | : | 87 W |
| Series | : | Small Stator UP Series |
| Temperature Rating | : | 40 deg C |
| Voltage Rating | : | 115 V |
Grundfos UPS N circulator pumps have a corrosion-free stainless steel pump housing and are recommended for domestic hot water recirculation and underfloor heating systems. UPS N can be connected to an on/off time switch to limit pump operation to periods when hot water is usually required. The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.
Grundfos Circulator Pump, Small Stator UP Series, Model: UPS 15-55 SFC, 5.7 cu-m/hr Flow Rate, 5.5 m Maximum Head, 87 W, 115 V, 0.53/0.69/0.75 A, 60 Hz, 10 bar Maximum Pressure, 3/4 in, 1 in Connection, Flanged Connection, 1 ph Phase, 2 Poles, 40 deg C, Stainless Steel, 6-8/16 in H x 5-8/16 in W, Additional Information: 3-Speed, 2-Bolt Flange Pipe Connection, 2 to 110 deg C Liquid Temperature, 983.2 kg/cu-m Density, 10 uF Capacitance, IEC 85 F Insulation Class
- Ceramic shaft and radial bearings
- Carbon axial bearing
- Stainless steel rotor can and bearing plate
- Corrosion-resistant impeller
- Stainless steel pump housing