| Amperage Rating | : | 13.3 A |
| BTU Rating | : | 32000 Btu/hr |
| CFM Rating | : | 5.45 cfm |
| Compressor Oil | : | Mineral |
| Dimensions | : | 9.5 in L x 9.5 in W x 15.86 in H |
| Discharge Line Size | : | 1/2 in Stub |
| EER Rating | : | 11.2 to 21.1 |
| Flow Rate | : | 478 to 545 lb/hr |
| Power Rating | : | 2910 W, 2-3/4 hp |
| Refrigerant Type | : | R-22, R-407C, R-134A, HFC |
| Series | : | ZR |
| Sound Level | : | 68 to 73 dBA |
| Speed Rating | : | 3500 rpm |
| Suction Line Size | : | 3/4 in Stub |
| Temperature Rating | : | 45 to 50 deg F Evaporator, 100 to 130 deg F Condensing, 65 to 70 deg F Return Gas, 85 to 115 deg F Liquid |
| Tonnage | : | 3 ton |
| Voltage Rating | : | 208 to 230 VAC |
Copeland™ Scroll Compressor, Series: ZR, 32000 Btu/hr BTU, 3 ton, 3/4 in Stub Suction Line, 1/2 in Stub Discharge Line, 478 - 545 lb/hr, 5.45 cu-ft/min, 208 - 230 VAC, 13.3 A, 2910 W, 2-3/4 hp, R-22, R-407C, R-134A, HFC Refrigerant, 3500 rev/min Speed, 68 - 73 dBA, 11.2 - 21.1 EER, Mineral Compressor Oil, 45-50 deg F Evaporator, 100-130 deg F Condensing, 65-70 deg F Return Gas, 85-115 deg F Liquid, 9-1/2 in L x 9-1/2 in W x 15.86 in H
- Capacitor run-permanent split capacitor motor type
- Internal inherent protection
- Compressor family Series
- Model variation
- 70% fewer moving parts
- Ability to start under any system load, without start components
- Compact, lightweight design
- No complex internal suction and discharge valves for quieter operation and higher reliability
- Axial and radial compliance allow the scroll members to separate in the presence of liquid refrigerant, thus providing protection against liquid damage
- Operate at lower sound and vibration levels than traditional compressors
- Easy to service and maintain due to their compact size and lightweight, simple design
- Engineered for optimum performance with today's chlorine-free refrigerants
- 25 oz initial oil charge, 19 oz oil recharge
- 115 cu-in internal free volume
- 7-1/2 in L x 7-1/2 in W x 16.08 in H mounting
- 17.1 A-rated load, 87 A locked rotor, 24 A minimum circuit, 22.5 A maximum operating
- 2.69 cu-in/rev displacement
- Bill of material-molded plug and mounting kit