HEIL® CHS CHS091HMA0A00A Heat Pump, 208/230 V, 25.1 A, 89000 Btu/hr BTU, 1/4 hp, 3 ph-Phase, Steel, R-410A Refrigerant

HEIL® CHS CHS091HMA0A00A Heat Pump, 208/230 V, 25.1 A, 89000 Btu/hr BTU, 1/4 hp, 3 ph-Phase, Steel, R-410A Refrigerant

Brand: HEIL®
Part #: 94365
Customer Part #:
Amperage Rating      :      25.1 A
BTU Rating      :      89000 Btu/hr
Coil Rating      :      23 sq-ft Face Area
Compressor Type      :      Scroll
Dimensions      :      45-7/8 in L x 59-3/8 in W x 42-3/8 in H
Drive Type      :      Direct
EER Rating      :      11
Finish      :      Enamel
Frequency Rating      :      60 Hz
HP Rating      :      1/4 hp
IEER Rating      :      12
Liquid Line Size      :      3/8 in
Material      :      Steel
Model      :      CHS
Number of Stages      :      1
Phase      :      3 ph
Power Rating      :      8.1 kW Cooling, 6.9 to 7.7 kW Heating
Refrigerant Type      :      R-410A
Rotational Speed      :      1100 rpm
Sound Level      :      82 dBA
Suction Line Size      :      7/8 to 1-1/8 in
Temperature Rating      :      -20 to 125 deg F
Tonnage      :      7.5 ton
Voltage Rating      :      208/230 V

HEIL® Heat Pump, Model: CHS, 208/230 V, 25.1 A, 8.1 kW Cooling, 6.9 to 7.7 kW Heating, 1/4 hp, 60 Hz, 3 ph Phase, 1100 rpm Rotational Speed, 89000 Btu/hr, 11 EER Rating, 12 IEER, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 7/8 to 1-1/8 in Suction Line, 23 sq-ft Face Area Coil, Direct Drive, Tonnage: 7.5 ton, 82 dBA Sound Level, 1 Stages, Steel, Finish: Enamel, -20 to 125 deg F, 45-7/8 in L x 59-3/8 in W x 42-3/8 in H

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of quiet operation
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125 F (52 C) and down to 35 F (2 C)
  • Models with optional low ambient control provide cooling operation down to -20 F (-29 C)
  • All units factory run tested
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/HEIL_CHS091HMA0A00A_Specification_Sheet.pdf

back To Top