| AFUE Rating | : | 80.3 % |
| Amperage Rating | : | 32.5 A |
| Blower Size | : | 11 x 10 in |
| CFM Rating | : | 1600 cfm |
| Coil Rating | : | 4.7 sq-ft Face Area Indoor, 17.5 sq-ft Face Area Outdoor |
| Compressor Type | : | Scroll |
| Connection Size | : | 1/2 in |
| Connection Type | : | NPT |
| Dimensions | : | 52-3/4 in H x 48-3/16 in W x 44-1/8 in D |
| Drain Connection | : | 3/4 in NPT |
| Drive Type | : | Direct |
| EER Rating | : | 11.05 |
| Filter Size | : | 24 x 36 x 1 in |
| Finish | : | Pre-Painted |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 50 A |
| HP Rating | : | 1 hp |
| Ignition Type | : | Direct Spark |
| Input BTU Rating | : | 48000 Btu/hr Cooling, 115000 Btu/hr Heating |
| Material | : | Steel |
| Model | : | PDD4 |
| Number of Stages | : | 1 |
| Output BTU Rating | : | 93000 Btu/hr |
| Phase | : | 1 ph |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 1075 rpm |
| SEER Rating | : | 14 |
| Series | : | Performance Series |
| Temperature Rating | : | 30 to 60 deg F |
| Tonnage | : | 4 ton |
| Voltage Rating | : | 208/230 V |
HEIL® Gas/Electric Package Unit, Performance Series, Model: PDD4, Input BTU Rating: 48000 Btu/hr Cooling, 115000 Btu/hr Heating, Output BTU Rating: 93000 Btu/hr, 208/230 V, 32.5 A, 1 hp, 1075 rpm Rotational Speed, 60 Hz, 1-Phase, Scroll Compressor, 1600 cfm, 11.05 EER Rating, 14 SEER, 80.3 % AFUE Rating, Tonnage: 4 ton, 1 Stages, R-410A Refrigerant, Direct Spark Ignition, Direct Drive, Blower Size: 11 x 10 in, 4.7 sq-ft Face Area Indoor, 17.5 sq-ft Face Area Outdoor Coil, 1/2 in Connection, NPT Connection, 3/4 in NPT Drain Connection, 24 x 36 x 1 in Filter, 50 A Fuse Rating, Steel, Finish: Pre-Painted, 30 to 60 deg F, 52-3/4 in H x 48-3/16 in W x 44-1/8 in D
- Environmentally balanced R−410A refrigerant
- Copper tube/aluminum fin condenser coils
- Aluminum tube/aluminum fin evaporator coils
- Dehumidification mode (airflow reduction) on all models
- Low NOx (40 ng/J emissions limit) and Ultra Low NOx (14 ng/J emissions limit) are for use in select air quality districts in CA
- Installs easily on a rooftop or at ground level
- Easy three−panel accessibility for maintenance and installation
- Easily converts to down discharge applications
- Combination gas heating and electric cooling
- Low NOx and Ultra Low NOx units available
- Induced-draft combustion and venting
- Direct spark ignition
- High efficiency ECM indoor blower motor on all models
- Vertical condenser fan discharge
- Full perimeter steel base rails
- Dense wire grille standard
- High pressure switch provides added reliability for the compressor
- Stainless steel tubular heat exchanger standard on all models
- Cabinet air leakage of 2.0% or less at 0.5 in. W.C. when tested per ASHRAE standard 193 (Low cabinet air leakage FIOP models only; not available for Ultra Low NOx.)
- Factory installed option for low cabinet air leakage (LW)