HEIL® PHD4 PHD436000K000K Single-Package Heat Pump System, 3 ton Nominal, 208/230 V, 1150 cfm, 14 SEER

HEIL® PHD4 PHD436000K000K Single-Package Heat Pump System, 3 ton Nominal, 208/230 V, 1150 cfm, 14 SEER

Brand: HEIL®
Part #: 93961
Customer Part #:
CFM Rating      :      1150 cfm
Coil Rating      :      4.7 sq-ft Face Area Indoor, 23.3 sq-ft Face Area Outdoor
Compressor Type      :      Scroll
Connection Size      :      3/4 in
Connection Type      :      NPT
Cooling BTU Rating      :      36000 Btu/hr
Dimensions      :      48-3/4 in H x 48-3/16 in W x 44-3/16 in D
Drive Type      :      Direct
EER Rating      :      11.05
Filter Size      :      24 x 14 x 1 in, 24 x 16 x 1 in
Finish      :      Pre-Painted
Fins per Inch      :      17 FPI Indoor, 21 FPI Outdoor
Frequency Rating      :      60 Hz
HP Rating      :      1/2 hp
HSPF Rating      :      6.7
Material      :      Steel
Model      :      PHD4
Nominal Capacity      :      3 ton
Phase      :      1 ph
Refrigerant Type      :      R-410A
Rotational Speed      :      810 rpm
SEER Rating      :      14
Sound Level      :      72 dBA
Voltage Rating      :      208/230 V

HEIL® Single-Package Heat Pump System, Model: PHD4, 3 ton Nominal Capacity, 36000 Btu/hr Cooling, 208/230 V, 1/2 hp, 60 Hz, 1-Phase, 810 rpm Rotational Speed, Scroll Compressor, 1150 cfm, 14 SEER, 6.7 HSPF, 11.05 EER Rating, NPT Connection, 3/4 in Connection, R-410A Refrigerant, 72 dBA Sound Level, Direct Drive, 4.7 sq-ft Face Area Indoor, 23.3 sq-ft Face Area Outdoor Coil, 17 FPI Indoor, 21 FPI Outdoor Fins per Inch, 24 x 14 x 1 in, 24 x 16 x 1 in Filter, Steel, Finish: Pre-Painted, 48-3/4 in H x 48-3/16 in W x 44-3/16 in D

  • Environmentally balanced R−410A refrigerant
  • Copper tube/aluminum fin condenser coil
  • Aluminum tube/aluminum fin evaporator coil
  • Scroll compressor standard on all models
  • Short−cycling protection for the compressor is built into the defrost control board
  • Dehumidification mode (airflow reduction) on all models
  • Direct Drive high efficiency ECM indoor blower motor on all models
  • Vertical condenser fan discharge
  • Full perimeter steel base rails
  • Dense wire grill standard
  • High and low pressure switches provide added reliability for the compressor
  • Cabinet air leakage of 2.0% or less at 0.5 in. W.C. when tested in accordance with ASHRAE Standard 193 (Low cabinet air leakage FIOP models only)
  • Installs easily on a rooftop or at ground level
  • Easy three−panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination electric heating and cooling
  • Three-year No Hassle Replacement™ limited warranty
  • Five-year parts limited warranty
  • Catalog https://assets.unilogcorp.com/267/ITEM/DOC/HEIL_PHD424000K000K_Catalog.pdf
  • Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/HEIL_PHD424000K000K_Instruction_Installation_Manual.pdf

back To Top