| BTU Rating | : | 18000 Btu/hr |
| CFM Rating | : | 525 to 625 cfm |
| Coil Type | : | Cased N |
| Color | : | Gray |
| Configuration | : | Downflow, Upflow |
| Connection Size | : | 3/8 in, 5/8 in, 3/4 in |
| Connection Type | : | Sweat |
| Dimensions | : | 12-5/8 in H x 14-3/16 in W x 21 in D |
| Face Area | : | 3.34 sq-ft |
| Fin Size | : | 17 in |
| Finish | : | Pre Painted/Sturdy |
| Refrigerant Type | : | R-410A |
| Series | : | END4X Series |
| Slab Size | : | 16 in L x 10 in H |
| Tonnage | : | 1.5 ton |
HEIL® Evaporator Coil, END4X Series, 18000 Btu/hr, Downflow, Upflow, 16 in L x 10 in H Slab, 525 to 625 cfm, Tonnage: 1.5 ton, R-410A Refrigerant, Cased N Coil, 3/8 in, 5/8 in, 3/4 in Connection, Sweat Connection, 3.34 sq-ft Face Area, 17 in Fin, Finish: Pre Painted/Sturdy, Gray, 12-5/8 in H x 14-3/16 in W x 21 in D
- Copper tube/aluminum fin "N" coil with latest high - tech fin design
- Bolt-on TXV metering device factory installed on all model
- Two condensate drain connections
- Removable front access panel
- Hemmed flanges for safer handling
- Foil faced insulation
- Non-sweat cabinet, even at extreme conditions
- Cabinets meet or exceed 2% air leakage codes
- Compact design, shorter than comparable A-coils
- Cabinet width match flush with ICP 14-3/16, 17-1/2, 21 and 24-1/2 in gas furnace cabinets (field fabricated transitions required to match other ICP furnace models)
- Aluminum hairpin
- Sales digit (major revision)